Product Features And Advantages

1.Microprocessors have "color control" function, stable voltage  change may cause the color temperature and output lumen change.

2. Light source and electronic ballast are developed and designed systematically optimized performance design.

3. Specfic operating freqnency, eliminating light flash, comfortable lighting effect.

4.Constant power output, small light color difference , stable output lumen, excellent lighting effect.

5.Low power consumption, less heat dissipation, effectively reduce energy consumption and reduce elctricity cost of enviroment temperature

6.Have the light end-of -life protection funtion,over temperature/voltage/load.short circuit protection etc.

7. Wide range operating voltage, can up to 180-364V max.

8.East wire connection, convenient installation.

Application

Stores, Retails,

Super Market and

Hypermarket.

standard and certificates

Safety:EN61347-1-12

THD:EN61000-3-2

EMC EMS:IEC61547

EMC EMI: CISPER15 ed7.2

Ivibration test:IEC68-2-6-Fc

Impact test: IEC68-2-29-Eb.IEC60068-2-27

Certificate:CE,CQC,RoHs,CCC

Quality standard:ISO9001

Environment standard:ISO14001

Installation Technical Parameters

rated power supp;y voltage:220-240v

performance voltage:+6%..-10% 198-254v

safe voltage:180-264v

frequency:50/60Hz

Operating Frequency(typical):140Hz

Starting Voltage:3-5KV

The space from any charged (metal) components to the earthing (Grade)or test(Grade II)and creepage distance:>5mm

Leak Current:every ballast<0.7ma

load capacity:Max.120pf

vibration resistance:10-500Hz,5G 12mins/period, 72mins for X,Y,Z axis each

IP Rating

EOL protection for luminaire

Short circuit protection

Over temperature protection

NOTES

In the case of a three-phase power supply, do not disconnect the neutral wire;otherwise the circuit may be damaged.

Ballast could withstand the 3 times voltage drop(>10ms),then should turn off and restart the power supply,to reset the ballast.

To achieve the appropriate electromagnetic compatibility , the internal circuit of lighting devices should be short  type circuit as far as possible; the power line should not be in fflat with the line of luminaires.

Overheating fixtures automatically start , the fixtures could be used 20mins at most.

Could not operate 24hours all day.