HPS Electronic Ballast 100W
Model：HPS Electronic Ballast 100W
code：HPS Electronic Ballast 100W
Product Features And Advantages 1.Microprocessors have "color control" function, stable voltage change may cause the color temperature and output lumen change. 2. Light source and electronic ballast are developed and designed systematically optimized performance design. 3. Specfic operating freqcontact
Product Features And Advantages
1.Microprocessors have "color control" function, stable voltage change may cause the color temperature and output lumen change.
2. Light source and electronic ballast are developed and designed systematically optimized performance design.
3. Specfic operating freqnency, eliminating light flash, comfortable lighting effect.
4.Constant power output, small light color difference , stable output lumen, excellent lighting effect.
5.Low power consumption, less heat dissipation, effectively reduce energy consumption and reduce elctricity cost of enviroment temperature
6.Have the light end-of -life protection funtion,over temperature/voltage/load.short circuit protection etc.
7. Wide range operating voltage, can up to 180-364V max.
8.East wire connection, convenient installation.
Super Market and
standard and certificates
EMC EMI: CISPER15 ed7.2
Impact test: IEC68-2-29-Eb.IEC60068-2-27
Installation Technical Parameters
rated power supp;y voltage:220-240v
performance voltage:+6%..-10% 198-254v
The space from any charged (metal) components to the earthing (Grade)or test(Grade II)and creepage distance:>5mm
Leak Current:every ballast<0.7ma
vibration resistance:10-500Hz,5G 12mins/period, 72mins for X,Y,Z axis each
EOL protection for luminaire
Short circuit protection
Over temperature protection
In the case of a three-phase power supply, do not disconnect the neutral wire;otherwise the circuit may be damaged.
Ballast could withstand the 3 times voltage drop(>10ms),then should turn off and restart the power supply,to reset the ballast.
To achieve the appropriate electromagnetic compatibility , the internal circuit of lighting devices should be short type circuit as far as possible; the power line should not be in fflat with the line of luminaires.
Overheating fixtures automatically start , the fixtures could be used 20mins at most.
Could not operate 24hours all day.
HPS Electronic Ballast 400W
HPS Electronic Ballast 250W
HPS Electronic Ballast 150W
HPS Electronic Ballast 100W
HPS Electronic Ballast 70W
HID-MH electronic ballast 150W
COSMO Electronic Ballast 140W AC220V
COSMO Electronic Ballast 90W AC220V/DC24V
COSMO Electronic Ballast 60W AC220V/DC24V
CDM-Elite Electronic Ballast 210W
HID-MH electronic ballast 250W
CDM Electronic Ballast 35W 70W
COSMO Electronic Ballast 45W AC220V/DC24V
CDM-Elite Electronic Ballast 315W