products
COSMO Electronic Ballast
COSMO Electronic Ballast 45W AC220V/DC24V
Overview:
Product Features and Advantages
Electronic ballast special for PHILIPS CosmoPolis lamp
Low frequency operation,eliminating light slash frequency
Above 50,000 hours super long life
Quicker light start function
Perfect protection function
Compact type,easy to install
60~264 wide range operating voltage
The light end-of-life protection function
More dimming series
Application
Outdoor lighting
Standard and Certifications
Safety:EN61347-2-12
THD:EN61000-3-2
EMC EMS:IEC61547
EMC EMI:CISPER15ed7.2
Vibration test:IEC68-2-6Fc
Impact test:IEC68-2-29-Eb.IEC60068-2-27
Certificate:CE,CQC,RoHs,CCC
Quality standard:ISO9001
Envrionment standard:ISO14001
Technical Parameters
| Product Model | light source | operating voltage | system power | voltage range | power facter | T-case Max. | ambient temp. |
| (V) | (W) | (V) | ( °C ) | (°C) | |||
| BSC2045B/cosmo | COSMO45W | AC220V | 45W | 160-260 | >=0.95 | -30 ...+50 | 80 |
| AC220V 45 | |||||||
| BSC7045B/cosmo | COSMO45W | DC24V | 45W | 18-28 | -30 ...+50 | 80 | |
| DC24V 45 |
Voltage Range: 180Vac~260Vac
Power Factor: > 0.98
Input Frequency: 50Hz~60Hz
Crest Factor: < 1.7
Efficiency: >90%
Total Harmonic Distortion: < 15%
Ignition Frequency: 400Hz ± 10Hz
Ignition Voltage: about 3KV
Dimming: No
Max Distance to Lamp: 5m
Length of lead wire: 15cm
-------Input Line: Yellow-Green-Blue
-------Output Line: White-White or Blue-Blue
T-ambient: -25 degrees ~ +55 degrees
T-case Max: 80 degrees
Heat Lamp Protection: Positive
Open Circuit Protection: Positive
Thermal Protection: Positive
Lamp Failure Protection: Positive
Sound Rating: A
Product Dimension (mm): 201*96*60
Packaging Dimension (mm): 230*107*75
Net Weight (Kg): 0.9
Material of the Case: Aluminium
Product Cetificates: RoHS & CE
IP Rating
EOL protection for luminaire
Short circuit protection
Over temperature protection
Note
1.In the case of a three-phase power supply,do not disconnect the neutral wire,otherwise the circuit may be damaged.
2.Ballast could withstand the 3 times voltage drop(>10ms),then should turn off and restart the power supply,to reset the ballast.
3.To achieve the appropriate electromagnetic compatibility,the internal circuit of lighting devices should be short type circuit as far as possible;the power line should not be in flat with the line of luminaires.
4.Overheating fixtures automatically start,the fixture could be used 20 mins at most.
5.Could not operate 24 hours all day.
- number
- title
- time
- download
