Low Voltage Series

  • EG-TRONIC 200W 6A
  • EG-TRONIC 200W 6A

EG-TRONIC 200W 6A

Features:
Nominal Input Voltage	100-277Vac 
Input Voltage AC	90-305Vac 
Nominal Input Frequency	50-60Hz 
Input Frequency AC	47-63Hz 
Nominal Input Current	0.66-2.2A
contact

Features

· Wide AC input

· Built-in active PFC function
· High efficiency up to 91%
· Protections: short circuit/ Over current/ Over voltage/ Over temperature
· IP67 design for outdoor installation
· Surge protection Integrated 4KV (IEC standard)

· Warranty: 5 years


Electronic output data

Model BS-H200-33
Specification item EG-TRONIC 200W 6.0A
Output Voltage 20-33Vdc
Output Voltage Max 35Vdc
Output Current 6.0A
Output Current Tolerance 5%
Output Current Ripple LF 5%
Output Power 208w
Galvanic Isolation Double; 3750V


Electronic input data

Specification item:           Value
Nominal Input Voltage:     100-277Vac
Input Voltage AC:            90-305Vac
Nominal Input Frequency:  50-60Hz
Input Frequency AC:         47-63Hz
Nominal Input Current:      0.84-2.34A
Maximum Input Current:    2.6A
Nominal Input Power:       234W Max
Power Factor:                  >0.95
Total Harmonic Distortion: < 20 %
Efficiency:                       92%


Logistic Data

Specification item: Value
Size:                    215x66x38mm
Weight:               1.1KG
Pcs/Ctn:              20
N.W:                   22 kg
G.W:                   23.5 KG
Ctn Size:              470x285x205 mm


Operational Temperature and Humidity

Specification item:        Value

Ambient Temperature:  -20...+55 °C

Tcase Maximum:          80 °C

Tcase Cut-Off:             90 °C


Applications
Road and street lighting
Area and flood lighting
Tunnel lighting

High-bay lighting


Mechanical Drawing



Installation notes

When using the power supply ,pls pay attention to distinguishing the input and output terminal ,and connect the wires correctly, then turn it on after making sure it is correct.

Please firstly connect the load of DC output terminal ,make sure it’s correct and then turn on the power supply.

Welding the power line to avoid other solder tin, tin, tin false, short circuit, all leads must avoid direct contact with the surface of capacitance

Using environment temperature must be in accordance with the specification requirements.

When power assembly to the fixture ,need to make an aging text more than 24hours according to the actual situation ,to ensure the quality of the fixture product


Abnormal  phenomena and corresponding processing methods

1.After good electrical connection in the power supply device for the first time, there  is not bright, please cut off the AC input terminal and check

DC output side has poor contact or not

DC output side’s anode and cathode is connected on the contrary  or not

AC input side has poor contact or not; test after eliminating all the failures above.

2.After good electrical connection, LED lamp is lighted ,but flashing,please cut off the AC input terminal, and check the DC output terminal:

Have overload ,overload or light load or not

Power supply designed parameters do not tally with the actual parameters


3.If meeting other questions or problems in the process of using our products, please communicate with us in time and give us feedback with the poor information ,we will actively assist you to solve the problems.

  • number
  • title
  • time
  • download

Contact US


Production Base: 4/F,7th Building, Jiaanda Industrial Park, Huafan Road

Longhua New District,Shenzhen, China

Sales hotline: 13798250413

Sales calls:0086-0755-29179085

Email :sales01@bersn.com

Friendship Link: 中文官网 |

SMART Lighting Control System LED Street Light LED Driver HID Electronic Ballast

2001-2013 Copyright © SHENZHEN BERSN OPTO-ELECTRONICS CO., LTD All images, text should not be copied without permission.  Technical:Ctmon